VER3446 - 2400 mm Andritz Double Wire Wet Lap Press for 150 Tpd

---

Manufacturer: Andritz, 1983
Capacity: 120/150 b.d. Tpd
Width: 2400 mm
Output measures of bale: 2 x 1200 mm x 800
Dryness - outcome: 35 - 42%
Operating speed: 26 m/min
Max speed: 31 m/min
Left hand drives

Description
Andritz mixing pump
Closed headbox between top and bottom wire; consistency 1,3 – 1,5 %; pressure 20 – 30 kPa

Wire part:
Dewatering elements: 18 + 5 registration rolls on the top wire, 18 + 4 on the bottom wire; 6 three nips press rolls
Tensioning of wires: tension top wire 60 N/cm; tension bottom wire 60 N/cm
Clothing specification: 2,55 x 15,65 m non seamed wire
To and bottom guiding system

Press part:
1 nip prepress, 2 rolls, pressure 0,5 MPa - 1 nip press, 2 rolls, pressure 0,47 MPa
Drive on the bottom press roll
Clothing specification: 2,65 x 8,3 m top and bottom felts
5 + 5 guiding rolls

Transport belts from press part to the cutter
Transport roll: 2 x Vacuum pumps; underpressure 0,02 up to 0,06 MPa

Cutting machine
Measures for Euro pallet format: 2 x 1200 mm x 800 mm
Stacker lifting for loading pallets
Conveyor for outcome of full pallets
Time of stack table lifting: 30 sec

Drives of wet lap machine
AC motors 660 Volts, frequency changer: 2 x 40 Kw, 1 x 14 Kw