VER3627 - 1650 mm Jagenberg 35-165 Simplex Synchro Sheet Cutter
With multi motor drive system
Installed 1999
Working width: 1650 mm trimmed; 1700 mm untrimmed before slitters; 405 mm min format width
Format range: 420 to 1600 mm
Max speed: 350 m/min
| Format (mm)
| 420
| 450
| 500
| 550
| 600
| 650
| 700
| 750
| 800-1150
| 1200
| 1300
| 1400
| 1500
| 1600
|
| Speed (m/min)
| 120
| 150
| 185
| 240
| 270
| 293
| 315
| 337
| 350
| 340
| 325
| 310
| 290
| 275
|
Material: coated and uncoated paper, starting from 50-60 g/m2 with 6-8 rolls coated an uncoated board up to 600 g/m2
Drives: Siemens thyristor controlled multi motor drive (4 x DC)
Voltage: 380 V, 50 cycles 3 phase + -5%
Voltage controls: 220 V, 50 cycles
Controls: Siemens SS-135 8 PLC; Simatic SS-1 15 U panel; Jagenberg DQA 190 automation system
Automation system: Jagenberg DQA 190. Input panel for format selection, format changing of drag link gearbox, roll Ø/length control, ream counter, automatic web tension control by digressive system
Slitters: Uniset slitting unit with 4 individual True-slit slitters. Top and bottom knives can be fixed for manual positioning; pneumatically engaged top knives; top knife in top speed quality; bottom knife as carbide knives; trim inlet at ach slitter.
Draw section: bottom roll molybdenum coated; top roll Adipren covered with pneumatic nip control; individual DC drive.
Cross knife section: fully synchronised cross knives; synchronisation by drag link gearbox; individual DC drive.
Reject gate: reject gate for rejecting of detected sheets; rejecting in box.
Overlapping: Vacu stop overlapping; overlapping separate driven
Layboy: pile height: automatic lowering platform, hydraulic layboy 1800 mm max; pile weight: 4 t max. Front and side jogging; 3 ream markers controlled by DQA 190
Unwind: 6 rolls shaftless unwind. Reel Ø 1270 mm max; reel weight 20.000 N max; reel width 1700 mm max and 700 mm min (using scissors table); core chucks 150 mm Ø; web tension equipment for 6 rolls.
Decurling unit: separate decurling station with decurler bar and motorical adjustment.
Inspection unit: 1 mono - colldetector inspection unit for splicers and holes controlled by DQA 190
Equipped with:
Mannesmann hydraulic unit
Siemens cabinet and panels
Trim removal system as available
Unused spare part package
Machine in operation
